Face Frame: 3/4" kiln-dried red oak constructed for long-term rigidity and strength.

End Panels: 3/8" industrial-grade particle board fastened to face frame with tongue-and-groove. When specified, end panels are finished with wood grain melamine to match face frame finish.

Back Panel: 1/8" hardboard.

Top/Bottom Panels: Wall cabinets constructed of 3/8" industrial-grade particle board dadoed into end panels and interlocked into hanging rails for strength. Base bottoms constructed similarly of 3/8" industrial-grade particle board.

Hanging Rails: 3/4" x 2 1/2" engineered composite material on upper cabinets. 3/4" x 1 5/8" engineered composite material on base cabinets.

Base Corner Braces: High impact, injection molded plastic.

Shelves: 1/2" industrial-grade particle board with edge banding. Wall shelving adjustable up to 24" wide. Base cabinets feature 11" deep half-shelf.

Toe Kick: 3/8" industrial-grade particle board fastened between end panels. Standard 2 1/2" deep and 3 1/2" tall. Toe base cover available in black or matching veneer finish.

Drawers: 3/8" industrial-grade particle board construction with 1/8" hardboard bottoms.

Drawer Guides: 100 lb. rated epoxy-coated drawer guides standard.

Doors & Drawers: Continental — 5/8" industrial-grade particle board overlaid and edge banded with white low pressure laminate. Resistant to most common household stains or abrasions. Solid oak pulls extend full width and are applied to both top and bottom of doors and drawers.

Hardware: Semi-concealed, barrel hinges are standard. Fully-concealed hinges available upon request. Pulls not required to open doors and drawers.

Interior Finish: All interior surfaces finished with white melamine that provides extreme resistance to water, alcohol, mild acids and household chemicals.

Exterior Finish: Exposed wood surfaces are finished with stain, sealer and catalyzed varnish, providing extreme resistance to water, alcohol, mild acids and household chemicals. Stains available include Autumn Oak, Iceburg, Rosewood, Fruitwood and Kaffe.

Handicap Requirements: All cabinets can be modified to accommodate ADA and Fair Housing specifications.

Warranty: Certified by the Kitchen Cabinet Manufacturers Association to exceed or meet industry standards for construction and performance. Mid-America also exceeds or meets standards of ANSI A161.1-1990. All Mid-America Cabinets carry a one-year warranty from date of purchase against defective material and workmanship. Any defective part will be replaced. This does not include labor, installation or transportation cost. Warranty does not apply to damages due to improper handling, installation or use.

Specifications are subject to change without prior notice. Thickness dimensions are nominal.